By combining extrapolated selected configuration interaction (sCI) energies obtained with the CIPSI (Configuration Interaction using a Perturbative Selection made Iteratively) algorithm with the recently proposed short-range density-functional correction for basis set incompleteness [\href{https://doi.org/10.1063/1.5052714}{Giner et al., \textit{J.~Chem.~Phys.}~\textbf{149}, 194301 (2018)}], we show that one can get chemically accurate vertical and adiabatic excitation energies with, typically, augmented double-$\zeta$ basis sets.
We illustrate the present approach on various types of excited states (valence, Rydberg and double excitations) in several small organic molecules (methylene, water, ammonia, carbon monoxide, carbon dimer and ethylene).
The present study clearly evidences that special care has to be taken with very diffuse excited states where the present correction might not be enough to catch the radial incompleteness of the one-electron basis set.
One of the most fundamental problems of conventional electronic structure methods is their slow energy convergence with respect to the size of the one-electron basis set.
The overall basis set incompleteness error can be, qualitatively at least, split in two contributions stemming from the radial and angular incompleteness.
Although for ground-state properties angular incompleteness is by far the main source of error, it is definitely not unusual to have a significant radial incompleteness in the case of excited states (especially for Rydberg states), which can be alleviated by using additional sets of diffuse basis functions (i.e.~augmented basis sets).
Although they have been extremely successful to speed up convergence of ground-state energies and properties, such as correlation and atomization energies, \cite{TewKloNeiHat-PCCP-07} their performances for excited states \cite{FliHatKlo-JCP-06, NeiHatKlo-JCP-06, HanKoh-JCP-09, Koh-JCP-09, ShiWer-JCP-10, ShiKniWer-JCP-11, ShiWer-JCP-11, ShiWer-MP-13} have been much more conflicting. \cite{FliHatKlo-JCP-06, NeiHatKlo-JCP-06}
Instead of F12 methods, here we propose to follow a different route and investigate the performance of the recently proposed universal density-based basis set
Contrary to our recent study on atomization and correlation energies, \cite{LooPraSceTouGin-JPCL-19} the present contribution focuses on vertical and adiabatic excitation energies in molecular systems which is a much tougher test for the reasons mentioned above.
This density-based correction relies on short-range correlation density functionals (with multideterminant reference) from range-separated density-functional theory \cite{TouColSav-PRA-04, AngGerSavTou-PRA-05, GolWerSto-PCCP-05, TouGerJanSavAng-PRL-09,JanHenScu-JCP-09, TouZhuSavJanAng-JCP-11, MusReiAngTou-JCP-15, LeiStoWerSav-CPL-97, FroTouJen-JCP-07, FroCimJen-PRA-10, HedKneKieJenRei-JCP-15, HedTouJen-JCP-18, FerGinTou-JCP-18} (RS-DFT) to capture the missing part of the short-range correlation effects, a consequence of the incompleteness of the one-electron basis set.
Because RS-DFT combines rigorously density-functional theory (DFT) \cite{ParYan-BOOK-89} and wave function theory (WFT) \cite{SzaOst-BOOK-96} via a decomposition of the electron-electron interaction into a non-divergent long-range part and a (complementary) short-range part (treated with WFT and DFT, respectively), the WFT method is relieved from describing the short-range part of the correlation hole around the electron-electron coalescence points.
Consequently, the energy convergence with respect to the size of the basis set is significantly improved, \cite{FraMusLupTou-JCP-15} and chemical accuracy can be obtained even with small basis sets.
For example, in Ref.~\onlinecite{LooPraSceTouGin-JPCL-19}, we have shown that one can recover quintuple-$\zeta$ quality atomization and correlation energies with triple-$\zeta$ basis sets for a much lower computational cost than F12 methods.
The present basis set correction assumes that we have, in a given (finite) basis set $\Bas$, the ground-state and the $k$th excited-state energies, $\E{0}{\Bas}$ and $\E{k}{\Bas}$, their one-electron densities, $\n{k}{\Bas}$ and $\n{0}{\Bas}$, as well as their opposite-spin on-top pair densities, $\n{2,0}{\Bas}(\br{},\br{})$ and $\n{2,k}{\Bas}(\br{},\br{})$,
are the kinetic and electron-electron repulsion operators, respectively, and $\wf{}{\Bas}$ and $\wf{}{}$ are two general $\Ne$-electron normalized wave functions belonging to the Hilbert space spanned by $\Bas$ and the complete basis set, respectively.
The notation $\wf{}{}\rightsquigarrow\n{}{}$ in Eq.~\eqref{eq:E_funcbasis} states that $\wf{}{}$ yields the one-electron density $\n{}{}$.
\manu{As it was initially proposed in Ref~\onlinecite{GinPraFerAssSavTou-JCP-18} and further developed in} Ref.~\onlinecite{LooPraSceTouGin-JPCL-19}, we have shown that one can efficiently approximate $\bE{}{\Bas}[\n{}{}]$ by short-range correlation functionals with multi-determinantal (ECMD) reference, \cite{TouGorSav-TCA-05}$\bE{\text{c,md}}{\sr}[\n{}{},\rsmu{}{}]$.
where $\Ec[\n{}{}]$ is the usual universal correlation density functional defined in Kohn-Sham DFT. \cite{HohKoh-PR-64, KohSha-PR-65}
The key ingredient --- the range-separated function $\rsmu{}{\Bas}(\br{})$ --- automatically adapts to the spatial non-homogeneity of the basis set incompleteness error.
It is defined such that the long-range interaction of RS-DFT, $\w{}{\lr,\mu}(r_{12})=\erf(\mu r_{12})/r_{12}$, coincides, at coalescence, with an effective two-electron interaction $\W{}{\Bas}(\br{1},\br{2})$ ``mimicking'' the Coulomb operator in an incomplete basis $\Bas$, i.e.~$\w{}{\lr,\rsmu{}{\Bas}(\br{})}(0)=\W{}{\Bas}(\br{},\br{})$ at any $\br{}$. \cite{GinPraFerAssSavTou-JCP-18}
The explicit expression of $\W{}{\Bas}(\br{1},\br{2})$ is given by
and $\Gam{pq}{rs}=2\mel*{\wf{}{\Bas}}{\aic{r_\downarrow}\aic{s_\uparrow}\ai{q_\uparrow}\ai{p_\downarrow}}{\wf{}{\Bas}}$ are the opposite-spin pair density associated with $\wf{}{\Bas}$ and its corresponding tensor, respectively, $\SO{p}{}$ is a (real-valued) molecular orbital (MO),
and $\V{pq}{rs}=\braket{pq}{rs}$ are two-electron Coulomb integrals. \manu{An important consequence of the definition of $\W{}{\Bas}(\br{1},\br{2})$ is that, when $\Bas$ is complete, the effective interaction tends to the regular $1/r_{12}$ which ensures that the present approximations $\bE{}{\Bas}[\n{}{}]$ vanishes when $\Bas$. }
where $\zeta=(\n{\uparrow}{}-\n{\downarrow}{})/\n{}{}$ is the spin polarization and $\be{\text{c,md}}{\sr,\LDA}(\n{}{},\zeta,\rsmu{}{})$ is the ECMD short-range correlation energy per electron of the uniform electron gas (UEG) \cite{LooGil-WIRES-16} parameterized in Ref.~\citenum{PazMorGorBac-PRB-06}.
To go beyond the LDA and cure its over correlation at small $\mu$, some of the authors recently proposed a Perdew-Burke-Ernzerhof (PBE)-based ECMD functional \cite{FerGinTou-JCP-18},
$\be{\text{c,md}}{\sr,\PBE}\qty(\n{}{},s,\zeta,\rsmu{}{})$ interpolates between the usual PBE correlation functional, \cite{PerBurErn-PRL-96}$\e{\text{c}}{\PBE}(\n{}{},s,\zeta)$, at $\rsmu{}{}=0$ (DFT limit) and the exact large-$\rsmu{}{}$ behavior (WFT limit). \cite{TouColSav-PRA-04, GorSav-PRA-06, PazMorGorBac-PRB-06}
More recently, \cite{LooPraSceTouGin-JPCL-19} we have also proposed a simplified version of the PBEot functional where we replaced the on-top pair density by its UEG version, i.e.~$\n{2}{\Bas}(\br{},\br{})\approx\n{2}{\UEG}(\n{}{}(\br{}),\zeta(\br{}))$, where $\n{2}{\UEG}(\n{}{},\zeta)\approx\n{}{2}(1-\zeta^2) g_0(n)$ with the parametrization of the UEG on-top pair-distribution function $g_0(n)$ given in Eq.~(46) of Ref.~\citenum{GorSav-PRA-06}.
In the present study, we compute the ground- and excited-state energies, one-electron and on-top densities with a selected configuration interaction (sCI) method known as CIPSI (Configuration Interaction using a Perturbative Selection made Iteratively). \cite{HurMalRan-JCP-73, GinSceCaf-CJC-13, GinSceCaf-JCP-15}
The total energy of each state is obtained via an efficient extrapolation procedure of the sCI energies designed to reach near-FCI accuracy. \cite{QP2}(\manu{We should add the reference to the original paper by cyrus})
We refer the interested reader to Refs.~\onlinecite{HolUmrSha-JCP-17, SceGarCafLoo-JCTC-18, LooSceBloGarCafJac-JCTC-18, SceBenJacCafLoo-JCP-18, LooBogSceCafJac-JCTC-19, QP2} for more details.
Except for methylene for which FCI/TZVP geometries have been taken from Ref.~\onlinecite{SheLeiVanSch-JCP-98}, the other geometries have been extracted from Refs.~\onlinecite{LooSceBloGarCafJac-JCTC-18, LooBogSceCafJac-JCTC-19} and have been obtained at the CC3/aug-cc-pVTZ level of theory.
Frozen-core calculations are systematically performed and defined as such: a \ce{He} core is frozen from \ce{Li} to \ce{Ne}, while a \ce{Ne} core is frozen from \ce{Na} to \ce{Ar}.
We refer the reader to Ref.~\onlinecite{LooPraSceTouGin-JPCL-19} for an explicit derivation of the equations associated with the frozen-core version of the present density-based basis set correction.
Compared to the exFCI calculations performed to compute energies and densities, the basis set correction represents, in any case, a marginal computational cost.
Methylene is a paradigmatic system in electronic structure theory. \cite{Sch-Science-86}
Due to its relative small size, its ground and excited states have been thoroughly studied with high-level ab initio methods. \cite{Sch-Science-86, BauTay-JCP-86, JenBun-JCP-88, SheVanYamSch-JMS-97, SheLeiVanSch-JCP-98, AbrShe-JCP-04, AbrShe-CPL-05, ZimTouZhaMusUmr-JCP-09, ChiHolAdaOttUmrShaZim-JPCA-18}
As a first test of the present density-based basis set correction, we consider the four lowest-lying states of methylene ($1\,^{3}B_1$, $1\,^{1}A_1$, $1\,^{1}B_1$ and $2\,^{1}A_1$) at their respective equilibrium geometry and compute the corresponding adiabatic transition energies for various basis sets ranging from AVDZ to AVQZ.
We have also computed total energies at the exFCI/AV5Z level and used these alongside the quadruple-$\zeta$ ones to extrapolate the total energies to the CBS limit with the usual extrapolation formula \cite{HelJorOls-BOOK-02}
These results are illustrated in Fig.~\ref{fig:CH2} and reported in Table \ref{tab:CH2} alongside reference values from the literature obtained with various deterministic and stochastic approaches. \cite{ChiHolAdaOttUmrShaZim-JPCA-18, SheLeiVanSch-JCP-98, JenBun-JCP-88, SheLeiVanSch-JCP-98, ZimTouZhaMusUmr-JCP-09}
Total energies for each state can be found in the {\SI}.
Figure \ref{fig:CH2} clearly shows that, for the double-$\zeta$ basis, the exFCI adiabatic energies are far from being chemically accurate with errors as high as 0.015 eV.
From the triple-$\zeta$ basis onward, the exFCI excitation energies are chemically-accurate though, and converge steadily to the CBS limit when one increases the size of the basis set.
The performance of the PBE and LDA functionals (which does not require the computation of the on-top density of each state) is less impressive.
Yet, they still yield significant reductions of the basis set incompleteness error, hence representing a good compromise between computational cost and accuracy.
Note that the results for the PBE functional are not represented in Fig.~\ref{fig:CH2} as they are very similar to the LDA ones (similar considerations apply to the other systems studied below).
It is also quite evident that, the basis set correction has the tendency of over-correcting the excitation energies via an over-stabilization of the excited states compared to the ground state.
This trend is quite systematic as we shall see below.
For the second test, we consider the water \cite{CaiTozRei-JCP-00, RubSerMer-JCP-08, LiPal-JCP-11, LooSceBloGarCafJac-JCTC-18, SceBenJacCafLoo-JCP-18, SceCafBenJacLoo-RC-19} and ammonia \cite{SchGoe-JCTC-17, BarDelPerMat-JMS-97, LooSceBloGarCafJac-JCTC-18} molecules.
They are both well-studied and possess Rydberg excited states which are highly sensitive to the radial completeness of the one-electron basis set, as evidenced in Ref.~\onlinecite{LooSceBloGarCafJac-JCTC-18}.
Table \ref{tab:Mol} reports vertical excitation energies for various singlet and triplet excited states of water and ammonia at various levels of theory (see the {\SI} for total energies).
The basis set corrected theoretical best estimates (TBEs) have been extracted from Ref.~\onlinecite{LooSceBloGarCafJac-JCTC-18} and have been obtained on the same geometries.
One would have noticed that the basis set effects are particularly strong for the third singlet excited state of water and the third and fourth singlet excited states of ammonia where this effect is even magnified.
In these cases, one really needs doubly-augmented basis sets to reach radial completeness.
The first observation worth reporting is that all three RS-DFT correlation functionals have very similar behaviors and they significantly reduce the error on the excitation energies for most of the states.
However, these results also clearly evidence that special care has to be taken for very diffuse excited states where the present correction might not be enough to catch the radial incompleteness of the one-electron basis set.\manu{It could be interesting to point out that such effects are far from being cusp like effects}
Vertical absorption energies $\Eabs$ (in eV) of excited states of ammonia, carbon dimer, carbon monoxyde, ethylene and water for various methods and basis sets.
It is interesting to study the behavior of $\rsmu{}{\Bas}(\br{})$ for different states as the basis set incompleteness error is obviously state specific.
To do so, we consider the ground state (${}^{1}\Sigma^+$) of carbon monoxide as well as its lowest singlet excited state (${}^{1}\Pi$).
The values of the vertical excitation energies obtained for various methods and basis sets are reported in Table \ref{tab:Mol}.
Figure \ref{fig:CO} represents $\rsmu{}{}(z)$ along the nuclear axis ($z$) for these two electronic states computed with the AVDZ, AVTZ and AVQZ basis sets. \manu{These figures illustrate several important things: i) the maximal values of $\rsmu{}{\Bas}(\br{})$ are systematically close to the nuclei, a signature of the atom-centered basis set, ii) the overall values of $\rsmu{}{\Bas}(\br{})$ increase with the basis set, which reflects the improvement of the description of the correlation effects when enlarging the basis set, iii) the value of $\rsmu{}{\Bas}(\br{})$ are slightly larger near the oxygen atom, which traduces the fact that the inter-electronic distance is higher than close to the carbon atom due to a higher nuclear charge. }
\caption{$\rsmu{}{\Bas}(z)$ along the molecular axis ($z$) for the ground state ${}^{1}\Sigma^+$ (black curve) and first singlet excited state ${}^{1}\Pi$ (red curve) of \ce{CO} for various basis sets $\Bas$.
The carbon and oxygen nuclei are located at $z=-1.249$ and $z=0.893$ bohr, respectively, and are represented by the thin black lines.}
In order to have a miscellaneous test set of excitations, in a fourth time, we propose to study some doubly-excited states of the carbon dimer \ce{C2}, a prototype system for strongly correlated and multireference systems. \cite{AbrShe-JCP-04, AbrShe-CPL-05, Var-JCP-08, PurZhaKra-JCP-09, AngCimPas-MP-12, BooCleThoAla-JCP-11, Sha-JCP-15, SokCha-JCP-16, HolUmrSha-JCP-17, VarRoc-PTRSMPES-18}
These two valence excitations --- $1\,^{1}\Sigma_g^+\ra1\,^{1}\Delta_g$ and $1\,^{1}\Sigma_g^+\ra2\,^{1}\Sigma_g^+$ --- are both of $(\pi,\pi)\ra(\si,\si)$ character.
They have been recently studied with state-of-the-art methods, and have been shown to be ``pure'' doubly-excited states as they do not involve single excitations. \cite{LooBogSceCafJac-JCTC-19}
An interesting point here is that one really needs to consider the PBEot functional to get chemically-accurate absorption energies with the AVDZ atomic basis set.
In other words, the UEG on-top density used in the LDA and PBE functionals (see Sec.~\ref{sec:func}) is a particularly bad approximation of the true on-top density for the present system.
As a final example, we consider the ethylene molecule, yet another system which has been particularly scrutinized theoretically using high-level ab initio methods. \cite{SerMarNebLinRoo-JCP-93, WatGwaBar-JCP-96, WibOliTru-JPCA-02, BarPaiLis-JCP-04, Ang-JCC-08, SchSilSauThi-JCP-08, SilSchSauThi-JCP-10, SilSauSchThi-MP-10, Ang-IJQC-10, DadSmaBooAlaFil-JCTC-12, FelPetDav-JCP-14, ChiHolAdaOttUmrShaZim-JPCA-18}
We refer the interested reader to the work of Feller et al.\cite{FelPetDav-JCP-14} for an exhaustive investigation dedicated to the excited states of ethylene using state-of-the-art CI calculations.
In the present context, ethylene is a particularly interesting system as it contains a mixture of valence and Rydberg excited states.
Our basis set corrected vertical excitation energies are gathered in Table \ref{tab:Mol} and depicted in Fig.~\ref{fig:C2H4}.
Except for one particular excitation (the lowest singlet-triplet excitation $1\,^{1}A_{1g}\ra1\,^{3}B_{1u}$), the exFCI+PBEot/AVDZ excitation energies are chemically accurate and the errors drop further when one goes to the triple-$\zeta$ basis.
Consistently with the previous examples, the LDA and PBE functionals are slightly less accurate, although they still correct the excitation energies in the right direction.
We have shown that, by employing the recently proposed density-based basis set correction developed by some of the authors, \cite{GinPraFerAssSavTou-JCP-18} one can obtain, using sCI methods, chemically-accurate excitation energies with typically augmented double-$\zeta$ basis sets.
This nicely complements our recent investigation on ground-state properties, \cite{LooPraSceTouGin-JPCL-19} which has evidenced that one recovers quintuple-$\zeta$ quality atomization and correlation energies with triple-$\zeta$ basis sets.
The present study clearly shows that, for very diffuse excited states, the present correction relying on short-range correlation functionals from RS-DFT might not be enough to catch the radial incompleteness of the one-electron basis set.
Also, in the case of multireference systems, we have evidenced that the PBEot functional is more appropriate than the LDA and PBE functionals relying on the UEG on-top density.
We are currently investigating the performance of the present basis set correction for strongly correlated systems and we hope to report on this in the near future.