loos/BSE_JPCLperspective
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5ab40ce4ee
BSE_JPCLperspective/Manuscript/BSE_JPCL.tex

446 lines
27 KiB
TeX
Raw Blame History

\newif\ifpreprint
%Preprint/reprint switch
%\preprinttrue % Enable for single column preprint
\preprintfalse % Enable for double column reprint
\ifpreprint
\documentclass[journal=jpclcd,manuscript=letter]{achemso}
\else
\documentclass[journal=jpclcd,manuscript=letter,layout=twocolumn]{achemso}
\fi
\usepackage[T1]{fontenc} % Use modern font encodings
\usepackage{amsmath}
\usepackage{newtxtext,newtxmath}
\usepackage{pifont}
\usepackage{graphicx}
\usepackage{dcolumn}
\usepackage{braket}
\usepackage{multirow}
\usepackage{threeparttable}
\usepackage{xspace}
\usepackage{verbatim}
\usepackage[version=4]{mhchem} % Formula subscripts using \ce{}
\usepackage{comment}
\usepackage{color,soul}
\usepackage{mathtools}
\usepackage[dvipsnames]{xcolor}
\usepackage{xspace}
\usepackage{graphicx,longtable,dcolumn,mhchem}
\usepackage{rotating,color}
\usepackage{lscape}
\usepackage{amsmath}
\usepackage{dsfont}
\usepackage{soul}
\usepackage{physics}
\newcommand{\cmark}{\color{green}{\text{\ding{51}}}}
\newcommand{\xmark}{\color{red}{\text{\ding{55}}}}
\newcommand{\ie}{\textit{i.e.}}
\newcommand{\eg}{\textit{e.g.}}
\newcommand{\alert}[1]{\textcolor{red}{#1}}
\definecolor{darkgreen}{HTML}{009900}
\usepackage[normalem]{ulem}
\newcommand{\titou}[1]{\textcolor{red}{#1}}
\newcommand{\denis}[1]{\textcolor{purple}{#1}}
\newcommand{\xavier}[1]{\textcolor{darkgreen}{#1}}
\newcommand{\trashPFL}[1]{\textcolor{red}{\sout{#1}}}
\newcommand{\trashDJ}[1]{\textcolor{purple}{\sout{#1}}}
\newcommand{\trashXB}[1]{\textcolor{darkgreen}{\sout{#1}}}
\newcommand{\PFL}[1]{\titou{(\underline{\bf PFL}: #1)}}
\renewcommand{\DJ}[1]{\denis{(\underline{\bf DJ}: #1)}}
\newcommand{\XB}[1]{\xavier{(\underline{\bf XB}: #1)}}
\newcommand{\mc}{\multicolumn}
\newcommand{\mr}{\multirow}
\newcommand{\ra}{\rightarrow}
\newcommand{\fnm}{\footnotemark}
\newcommand{\fnt}{\footnotetext}
\newcommand{\tabc}[1]{\multicolumn{1}{c}{#1}}
\newcommand{\SI}{\textcolor{blue}{supporting information}}
%matrices
\newcommand{\bO}{\boldsymbol{0}}
\newcommand{\bH}{\boldsymbol{H}}
\newcommand{\bh}{\boldsymbol{h}}
\newcommand{\bc}{\boldsymbol{c}}
\renewcommand{\tr}[1]{{#1}^{\dag}}
% methods
\newcommand{\DFT}{\text{DFT}}
\newcommand{\KS}{\text{KS}}
\newcommand{\BSE}{\text{BSE}}
\newcommand{\GW}{GW}
\newcommand{\XC}{\text{xc}}
% units
\newcommand{\IneV}[1]{#1 eV}
\newcommand{\InAU}[1]{#1 a.u.}
\newcommand{\InAA}[1]{#1 \AA}
\newcommand{\kcal}{kcal/mol}
\usepackage[colorlinks = true,
linkcolor = blue,
urlcolor = black,
citecolor = blue,
anchorcolor = black]{hyperref}
\definecolor{goodorange}{RGB}{225,125,0}
\definecolor{goodgreen}{RGB}{5,130,5}
\definecolor{goodred}{RGB}{220,50,25}
\definecolor{goodblue}{RGB}{30,144,255}
\newcommand{\note}[2]{
\ifthenelse{\equal{#1}{F}}{
\colorbox{goodorange}{\textcolor{white}{\footnotesize \fontfamily{phv}\selectfont #1}}
\textcolor{goodorange}{{\footnotesize \fontfamily{phv}\selectfont #2}}\xspace
}{}
\ifthenelse{\equal{#1}{R}}{
\colorbox{goodred}{\textcolor{white}{\footnotesize \fontfamily{phv}\selectfont #1}}
\textcolor{goodred}{{\footnotesize \fontfamily{phv}\selectfont #2}}\xspace
}{}
\ifthenelse{\equal{#1}{N}}{
\colorbox{goodgreen}{\textcolor{white}{\footnotesize \fontfamily{phv}\selectfont #1}}
\textcolor{goodgreen}{{\footnotesize \fontfamily{phv}\selectfont #2}}\xspace
}{}
\ifthenelse{\equal{#1}{M}}{
\colorbox{goodblue}{\textcolor{white}{\footnotesize \fontfamily{phv}\selectfont #1}}
\textcolor{goodblue}{{\footnotesize \fontfamily{phv}\selectfont #2}}\xspace
}{}
}
\usepackage{titlesec}
%\usepackage{footnote}
%
\let\titlefont\undefined
\usepackage[fontsize=11pt]{scrextend}
\captionsetup{font={sf,footnotesize}}
%
\titleformat{\section}
{\normalfont\sffamily\bfseries\color{Blue}}
{\thesection.}{0.25em}{\uppercase}
\titleformat{\subsection}[runin]
{\normalfont\sffamily\bfseries}
{\thesubsection}{0.25em}{}[.\;\;]
\titleformat{\suppinfo}
{\normalfont\sffamily\bfseries}
{\thesubsection}{0.25em}{}
\titlespacing*{\section}{0pt}{0.5\baselineskip}{0.01\baselineskip}
\titlespacing*{\subsection}{0pt}{0.125\baselineskip}{0.01\baselineskip}
\renewcommand{\refname}{\normalfont\sffamily\bfseries\color{Blue}{\normalsize REFERENCES}}
\setlength{\bibsep}{0pt plus 0.3ex}
\author{Xavier Blase}
\email{xavier.blase@neel.cnrs.fr}
\affiliation[NEEL, Grenoble]{Universit\'e Grenoble Alpes, CNRS, Institut NEEL, F-38042 Grenoble, France}
\author{Ivan Duchemin}
\affiliation[CEA, Grenoble]{Universit\'e Grenoble Alpes, CEA, IRIG-MEM-L Sim, 38054 Grenoble, France}
\author{Denis Jacquemin}
\affiliation[CEISAM, Nantes]{Universit\'e de Nantes, CNRS, CEISAM UMR 6230, F-44000 Nantes, France}
\author{Pierre-Fran\c{c}ois Loos}
\email{loos@irsamc.ups-tlse.fr}
\affiliation[LCPQ, Toulouse]{Laboratoire de Chimie et Physique Quantiques, Universit\'e de Toulouse, CNRS, UPS, France}
\let\oldmaketitle\maketitle
\let\maketitle\relax
\title{A Chemist Guide to the Bethe-Salpeter Formalism}
\date{\today}
\begin{tocentry}
\vspace{1cm}
% \includegraphics[width=\textwidth]{TOC}
\end{tocentry}
\begin{document}
\ifpreprint
\else
\twocolumn[
\begin{@twocolumnfalse}
\fi
\oldmaketitle
%%%%%%%%%%%%%%%%
%%% ABSTRACT %%%
%%%%%%%%%%%%%%%%
\begin{abstract}
The many-body Green's function Bethe-Salpeter formalism is steadily asserting itself as a new efficient and accurate tool in the armada of computational methods available to chemists in order to predict neutral electronic excitations in molecular systems.
In particular, the combination of the so-called $GW$ approximation of many-body perturbation theory, giving access to reliable charged excitations and quasiparticle energies, and the Bethe-Salpeter formalism, allowing to catch excitonic effects, has shown to provide accurate excitation energies in many chemical scenarios with a typical error of $0.1$--$0.3$ eV.
In this \textit{Perspective} article, we provide a historical overview of the Bethe-Salpeter formalism, with a particular focus on its condensed-matter roots, and we propose a critical review of its strengths and weaknesses for different chemical situations, such as \titou{bla bla bla}.
Future directions of developments and improvements are also discussed.
\end{abstract}
\ifpreprint
\else
\end{@twocolumnfalse}
]
\fi
\ifpreprint
\else
\small
\fi
\noindent
%%%%%%%%%%%%%%%%%%%%
%%% INTRODUCTION %%%
%%%%%%%%%%%%%%%%%%%%
In its press release announcing the attribution of the 2013 Nobel prize in Chemistry to Karplus, Levitt and Warshel, the Royal Swedish Academy of Sciences concluded by stating \textit{``Today the computer is just as important \titou{as} a tool for chemists as the test tube. Simulations are so realistic that they predict the outcome of traditional experiments.''} Martin Karplus Nobel lecture moderated this bold statement, introducing his presentation by a 1929 quote from Dirac emphasizing that laws of quantum mechanics are \textit{``much too complicated to be soluble''}, urging the scientist to develop \textit{``approximate practical methods''}. This is where the methodology community stands, attempting to develop robust approximations to study with increasing accuracy the properties of ever more complex systems.
The study of neutral electronic excitations in condensed matter systems, from molecules to extended solids, has witnessed the development of a large number of such approximate methods with numerous applications to a large variety of fields, from the prediction of the colour of precious metals and stones for jewellery, to the understanding, \eg, of the basic principles behind photovoltaics, photocatalysis or DNA damage under irradiation in the context of biology. The present Perspective aims at describing the current status and upcoming challenges for the Bethe-Salpeter equation (BSE) formalism that, while sharing many features with time-dependent density functional theory (TD-DFT), including computational cost scaling with system size, relies on a different formalism, with specific difficulties but also potential solutions to known difficulties.
The Bethe-Salpeter equation formalism \cite{Salpeter_1951,Strinati_1988,Albrecht_1998,Rohlfing_1998,Benedict_1998,vanderHorst_1999} belongs to the family of Green's function many-body perturbation theories (MBPT) \cite{Hedin_1965,Aryasetiawan_1998,Onida_2002,Reining_2017,ReiningBook} to which belong as well the algebraic diagrammatic construction (ADC) techniques in quantum chemistry. \cite{Dreuw_2015} While the density and density matrix stand as the basic variables in DFT and Hartree-Fock, Green's function MBPT takes the one-body Green's function as the central quantity. The (time-ordered) one-body Green's function reads:
\begin{equation}
G(xt,x't') = -i \langle N | T \left[ {\hat \psi}(xt) {\hat \psi}^{\dagger}(x't') \right] | N \rangle
\end{equation}
where $| N \rangle $ is the N-electron ground-state wavefunction. The operators ${\hat \psi}(xt)$ and ${\hat \psi}^{\dagger}(x't')$ remove/add an electron in space-spin-time positions (xt) and (x't'), while $T$ is the time-ordering operator. For (t>t') the one-body Green's function provides the amplitude of probability of finding bla bla \\
\noindent{\textbf{Charged excitations.}} A central property of the one-body Green's function is that its spectral representation presents poles at the charged excitation energies of the system :
\begin{equation}
G(x,x'; \omega ) = \sum_n \frac{ f_s(x) f^*_s(x') }{ \omega - \varepsilon_s + i \eta \times \text{sgn}(\varepsilon_s - \mu ) } \label{spectralG}
\end{equation}
where $\varepsilon_s = E_s(N+1) - E_0(N)$ for $\varepsilon_s > \mu$ ($\mu$ chemical potential, $\eta$ small positive infinitesimal) and $\varepsilon_s = E_0(N) - E_s(N-1)$ for $\varepsilon_s < \mu$. The quantities $E_s(N+1)$ and $E_s(N-1)$ are the total energy of the $s$-th excited state of the $(N+1)$ and $(N-1)$-electron systems, while $E_0(N)$ is the $N$-electron ground-state energy. Contrary to the Kohn-Sham eigenvalues, the Green's function poles $\lbrace \varepsilon_s \rbrace$ are thus the proper charging energies of the N-electron system, leading to well-defined ionization potentials and electronic affinities. Contrary to standard $\Delta$SCF techniques, the knowledge of $G$ provides the full ionization spectrum, as measured by direct and inverse photoemission, not only that associated with frontier orbitals. The $\lbrace f_s \rbrace$ are called the Lehmann amplitudes that reduce to one-body orbitals in the case of single-determinent many-body wave functions [more ??].
Using the equation of motion for the creation/destruction operators, it can be shown formally that $G$ verifies :
\begin{equation}
\qty[ \pdv{}{t_1} - h({\bf r}_1) ] G(1,2) - \int d3 \; \Sigma(1,3) G(3,2)
= \delta(1,2) \label{Gmotion}
\end{equation}
where we introduce the usual composite index, \eg, $1 \equiv (x_1,t_1)$. Here, $h$ is the one-body Hartree Hamiltonian and $\Sigma$ the so-called exchange-correlation self-energy operator. Using the spectral representation of $G$, one obtains a familiar eigenvalue equation:
\begin{equation}
h({\bf r}) f_s({\bf r}) + \int d{\bf r}' \; \Sigma({\bf r},{\bf r}'; \varepsilon_s ) f_s({\bf r}) = \varepsilon_s f_s({\bf r})
\end{equation}
which resembles formally the Kohn-Sham equation with the difference that the self-energy $\Sigma$ is non-local, energy dependent and non-hermitian. The knowledge of the self-energy operators allows thus to obtain the true addition/removal energies, namely the entire spectrum of occupied and virtual electronic energy levels, at the cost of solving a generalized one-body eigenvalue equation. [INTRODUCE QUASIPARTICLES and OTHER solutions ??] \\
\noindent{\textbf{The $GW$ self-energy.}} While the presented equations are formally exact, it remains to provide an expression for the exchange-correlation self-energy operator $\Sigma$. This is where Green's function practical theories differ. Developed by Lars Hedin in 1965 with application to the interacting homogeneous electron gas, \cite{Hedin_1965} the $GW$ approximation follows the path of linear response by considering the variation of $G$ with respect to an external perturbation. The obtained equation, when compared with the equation for the time-evolution of $G$ (Eqn.~\ref{Gmotion}), leads to a formal expression for the self-energy :
\begin{equation}
\Sigma(1,2) = i \int d34 \; G(1,4) W(3,1^{+}) \Gamma(42,3)
\end{equation}
where $W$ is the dynamically screened Coulomb potential and $\Gamma$ a ``vertex" function that can be written as $\Gamma(12,3) = \delta(12)\delta(13) + \mathcal{O}(W)$ where $\mathcal{O}(W)$ means a corrective term with leading linear order in terms of $W$. The neglect of the vertex leads to the so-called $GW$ approximation for $\Sigma$ that can be regarded as the lowest-order perturbation in terms of the screened Coulomb potential $W$ with :
\begin{align}
W(1,2) &= v(1,2) + \int d34 \; v(1,2) \chi_0(3,4) W(4,2) \\
\chi_0(1,2) &= -i \int d34 \; G(2,3) G(4,2)
\end{align}
with $\chi_0$ the well-known independent electron susceptibility and $v$ the bare Coulomb potential. In practice, the input $G$ and $\chi_0$ needed to buld $\Sigma$ are taken to be the best Green's function and susceptibility that can be easily calculated, namely the DFT (or HF) ones where the $\lbrace \varepsilon_s, f_s \rbrace$ of equation~\ref{spectralG} are taken to be DFT Kohn-Sham (or HF) eigenstates. Taking then $( \Sigma^{\GW}-V^{\XC} )$ as a correction to the $V^{\XC}$ DFT exchange correlation potential, a first-order correction to the input Kohn-Sham $\lbrace \varepsilon_n^{KS} \rbrace$ energies is obtained as follows:
\begin{equation}
\varepsilon_n^{\GW} = \varepsilon_n^{\KS} +
\langle \phi_n^{\KS} | \Sigma^{\GW}(\varepsilon_n^{\GW}) -V^{\XC} | \phi_n^{\KS} \rangle
\end{equation}
Such an approach, where input Kohn-Sham energies are corrected to yield better electronic energy levels, is labeled the single-shot, or perturbative, $G_0W_0$ technique. This simple scheme was used in the early $GW$ studies of extended semiconductors and insulators, [REFS]
surfaces [REFs], and 2D systems, [REFS] allowing to dramatically reduced the errors associated with Kohn-Sham eigenvalues in conjunction with the common LDA approximation.
In particular, the well-known ``band gap" problem, [REFS] namely the underestimation of the occupied to unoccupied bands energy gap at the LDA Kohn-Sham level, was dramatically reduced, bringing the agreement with experiment to within a very few tenths of an eV [REFS] with an $\mathcal{O}(N^4)$ computational cost scaling (see below). As another important feature compared to other perturbative techniques, the $GW$ formalism can tackle finite size and periodic systems, and does not present any divergence in the limit of zero gap (metallic) systems. [REFS] However, remaining a low order perturbative approach starting with mono-determinental mean-field solutions, it is not intended to explore strongly correlated systems. [REFS to Hubbard cluster and discuss bubbles in a Note ???] \\
\noindent {\textbf{Neutral excitations.}} While TD-DFT starts with the variation of the charge density $\rho$ with respect to an external local perturbation, the BSE formalism considers a generalized 4-points susceptibility that monitors the variation of the Green's function with respect to a non-local external perturbation:
\begin{equation}
\chi(1,2) \stackrel{\DFT}{=} \frac{ \partial \rho(1) }{\partial U(2) }
\;\; \rightarrow \;\;
L(12,34) \stackrel{\BSE}{=} -i \frac{ \partial G(1,2) } { \partial U(3,4) }
\end{equation}
%with the relation $\chi(1,2) = L(11,22)$ since $\rho(1) = -iG(1,1^{+})$, as a first bridge between the TD-DFT and BSE worlds.
The equation of motion for $G$ (Eqn.~\ref{Gmotion}) can be reformulated in the form of a Dyson equation:
\begin{equation}
G = G_0 + G_0 \Sigma G
\end{equation}
that relates the full (interacting) $G$ to the Hartree $G_0$ obtained by replacing the $\lbrace \varepsilon_s, f_s \rbrace$ by the Hartree eigenvalues and eigenfunctions.
The derivation by $U$ of the Dyson equation yields :
\begin{align}
L(12,34) &= L^0(12,34) + \nonumber \\
& \int d5678 \; L^0(12,34) \Xi(5,6,7,8) L(78,34)
\label{DysonL}
\end{align}
with $L_0 = \partial G_0 / \partial U$ the Hartree 4-point susceptibility and:
\begin{align*}
\Xi(5,6,7,8) = v(5,7) \delta(56) \delta(78) + \frac{ \partial \Sigma(5,6) }{ \partial G(7,8) }
\end{align*}
This equation can be compared to its TD-DFT analog:
\begin{equation}
\chi(1,2) = \chi_0(1,2) + \int d34 \; \chi_0(1,3) \Xi^{\DFT}(3,4) \chi(4,2)
\end{equation}
with $\Xi^{\DFT}$ the TD-DFT kernel :
\begin{equation}
\Xi^{\DFT}(3,4) = v(3,4) + \frac{ \partial V^{\XC}(3) }{ \partial \rho(4) }
\end{equation}
Plugging now the $GW$ self-energy, in a scheme that we label the BSE/$GW$ approach, leads to an approximation to the BSE kernel:
\begin{align*}
\Xi(5,6,7,8) = v(5,7) \delta(56) \delta(78) -W(5,6) \delta(57) \delta(68 )
\end{align*}
where it is traditional to neglect the derivative $( \partial W / \partial G)$ that introduces again higher orders in $W$. Taking the static limit $W(\omega=0)$ for the screened Coulomb potential, that replaces thus the static DFT exchange-correlation kernel, and expressing equation~\ref{DysonL} in the standard product space $\lbrace \phi_i({\bf r}) \phi_a({\bf r}') \rbrace$ where (i,j) and (a,b) index occupied and virtual orbitals, leads to an eigenvalue problem similar to the so-called Casida's equations in TD-DFT :
\begin{equation}
\left(
\begin{matrix}
R & C \\
-C^* & R^{*}
\end{matrix}
\right) \cdot
\left(
\begin{matrix}
X^{\lambda} \\
Y^{\lambda}
\end{matrix}
\right) =
\Omega_{\lambda}
\left(
\begin{matrix}
X^{\lambda} \\
Y^{\lambda}
\end{matrix}
\right)
\end{equation}
with electron-hole (e-h) eigenstates written:
\begin{equation}
\psi_{\lambda}^{eh}(r_e,r_h) = \sum_{ia} \left( X_{ia}^{ \lambda}
\phi_i({r}_h) \phi_a({r}_e) + Y_{ia}^{ \lambda}
\phi_i({r}_e) \phi_a({r}_h) \right)
\end{equation}
where $\lambda$ index the electronic excitations. The $\lbrace \phi_{i/a} \rbrace$ are the input (Kohn-Sham) eigenstates used to build the $GW$ self-energy. The resonant part of the BSE Hamiltonian reads:
\begin{align*}
R_{ai,bj} = \left( \varepsilon_a^{\GW} - \varepsilon_i^{\GW} \right) \delta_{ij} \delta_{ab} + \eta (ai|bj) - W_{ai,bj}
\end{align*}
with $\eta=2,0$ for singlets/triplets and:
\begin{equation}
W_{ai,bj} = \int d{\bf r} d{\bf r}'
\phi_i({\bf r}) \phi_j({\bf r}) W({\bf r},{\bf r}'; \omega=0)
\phi_a({\bf r}') \phi_b({\bf r}')
\end{equation}
where we notice that the 2 occupied (virtual) eigenstates are taken at the same space position, in contrast with the
$(ai|bj)$ bare Coulomb term. As compared to TD-DFT :
\begin{itemize}
\item the $GW$ quasiparticle energies $\lbrace \varepsilon_{i/a}^{\GW} \rbrace$ replace the Kohn-Sham eigenvalues
\item the non-local screened Coulomb matrix elements replaces the DFT exchange-correlation kernel.
\end{itemize}
We emphasise that these equations can be solved at exactly the same cost as the standard TD-DFT equations once the quasiparticle energies and screened Coulomb potential $W$ are inherited from preceding $GW$ calculations. This defines the standard (static) BSE/$GW$scheme that we discuss in this Perspective, emphasizing its pros and cons. \\
%% BSE historical
Originally developed in the framework of nuclear physics, \cite{Salpeter_1951}
the use of the BSE formalism in condensed-matter physics emerged in the 60s at the semi-empirical tight-binding level with the study of the optical properties of simple semiconductors. \cite{Sham_1966,Strinati_1984,Delerue_2000}
Three decades latter, the first \textit{ab initio} implementations, starting with small clusters \cite{Onida_1995,Rohlfing_1998} and extended semiconductors and wide-gap insulators, \cite{Albrecht_1997,Benedict_1998,Rohlfing_1999}
paved the way to the popularization in the solid-state physics community of the BSE formalism.
Following early applications to periodic polymers and molecules, [REFS] the BSE formalism gained much momentum in the quantum chemistry community with in particular several benchmarks \cite{Korbel_2014,Jacquemin_2015a,Bruneval_2015,Jacquemin_2015b,Hirose_2015,Jacquemin_2017,Krause_2017,Gui_2018} on large molecular systems performed with the very same running parameters (geometries, basis sets) than the available reference higher-level calculations such as CC3. [REFS] Such comparisons were grounded in the development of codes replacing the planewave solid-state physics paradigm by well documented correlation-consistent Gaussian basis sets, together with adequate auxiliary bases when resolution-of-the-identity techniques were used. [REFS]
An important conclusion drawn from these calculations was that the quality of the BSE excitation energies are strongly correlated to the deviation of the preceding $GW$ HOMO-LUMO gap with the experimental (IP-AE) photoemission gap. Standard $G_0W_0$ calculations starting with Kohn-Sham eigenstates generated with (semi)local functionals yield much larger HOMO-LUMO gaps than the input Kohn-Sham one, but still too small as compared to the experimental (AE-IP) value. Such an underestimation of the (IP-AE) gap leads to a similar underestimation of the lowest optical excitation energies.
Such a residual HOMO-LUMO gap problem can be significantly improved by adopting exchange-correlation functionals that yield a much improved HOMO-LUMO gap as a starting point for the $GW$ correction. Obviously, optimally tuned functionals such that the Kohn-Sham HOMO-LUMO gap matches the $\Delta$SCF (AE-IP) value, yields excellent $GW$ gaps and much improved resulting BSE excitations. Alternatively, self-consistent schemes, where ...
too small by up to an eV in the case of small
\vskip 5cm
interest from the quantum chemistry community BSE formalism
chemistry oriented reviews with, e.g., the language of localized basis and resolution-of-the-identity techniques, \cite{Ren_2012} or applications related to organic molecular systems, photoelectrochemistry, etc. \cite{Ping_2013,Leng_2016,Blase_2018}
large molecular benchmarks with comparisons to TD-DFT and higher level wavefunctions techniques such as CC3
Reinjecting the corrected eigenvalues into the construction of $G$ and $W$ leads to a partially self-consistent scheme where eigenvalues are updated, while keeping input one-body orbitals frozen to their Kohn-Sham ansatz. Such a simple self-consistent scheme is labelled ev$GW$, [REFS] as a simple alternative to more involved self-consistent schemes where both eigenvalues and eigenstates are updated. [REFS] \\
charge transfer
classification into local-, Rydberg-, or charge transfer-type
\cite{Hirose_2017} ad developed extensively in to the TD-DFT community.
\noindent {\textbf{The computational challenge.}} \\
pooling empty state with common energy denominator techniques, \cite{Bruneval_2008}
replacing the sum over unoccupied states by iterative techniques \cite{Umari_2010,Giustino_2010} already known in TDDFT. \cite{Walker_2006} Such techniques proved to be very efficient in the case in particular of planewave basis sets that generate very large number of empty states.
%%
Another approach, that proved very fruitful, lies in the so-called space-time approach by Rojas and coworkers, \cite{Rojas_1995} that borrows the idea of Laplace transform formulation, already used in quantum chemistry perturbation theories, \cite{Almlof_1991,Haser_1992} with the further concept of separability
\noindent {\textbf{The challenge of Analytic gradients.}} \\
An additional issue concerns the formalism taken to calculate the ground-state energy for a given atomic configuration. Since the BSE formalism presented so far concerns the calculation of the electronic excitations, namely the difference of energy between the GS and the ES, gradients of the ES absolute energy require
This points to another direction for the BSE foramlism, namely the calculation of GS total energy with the correlation energy calculated at the BSE level. Such a task was performed by several groups using in particular the adiabatic connection fluctuation-dissipation theorem (ACFDT), focusing in particular on small dimers. \cite{Olsen_2014,Holzer_2018b,Li_2020,Loos_2020}
\noindent {\textbf{The Triplet Instability Challenge.}} \\
The analysis of the singlet-triplet splitting is central to numerous applications such as singlet fission, thermally activated delayed fluorescence (TADF) or
stability analysis of restricted closed-shell solutions at the HF \cite{Seeger_1977} and TD-DFT \cite{Bauernschmitt_1996} levels.
contaminating as well TD-DFT calculations with popular range-separated hybrids (RSH) that generally contains a large fraction of exact exchange in the long-range. \cite{Sears_2011}
While TD-DFT with RSH can benefit from tuning the range-separation parameter as a mean to act on the triplet instability, \cite{Sears_2011} BSE calculations do not offer this pragmatic way-out since the screened Coulomb potential that builds the kernel does not offer any parameter to tune.
benchmarks \cite{Jacquemin_2017b,Rangel_2017}
a first cure was offered by hybridizing TD-DFT and BSE, namely adding to the BSE kernel the correlation part of the underlying DFT functional used to build the susceptibility and resulting screened Coulomb potential $W$. \cite{Holzer_2018b}
\noindent {\textbf{Dynamical kernels and multiple excitations.}} \\
\cite{Zhang_2013}
\noindent {\textbf{Core-level spectroscopy.}}. \\
XANES,
\cite{Olovsson_2009,Vinson_2011}
diabatization and conical intersections \cite{Kaczmarski_2010}
\noindent {\textbf{The Concept of dynamical properties.}}
As a chemist, it is maybe difficult to understand the concept of dynamical properties, the motivation behind their introduction, and their actual usefulness.
Here, we will try to give a pedagogical example showing the importance of dynamical quantities and their main purposes.
To do so, let us consider we want to solve a hard problem given by the Schr{\"o}dinger-like equation of the form $\bH \bc = \omega \bc$.
If we assume that the Hamiltonian $\bH$ is of size $N \times N$, this \textit{linear} set of equations yields $K$ solutions.
However, in practice, $K$ can be very large.
Therefore, it is usually convenient to recast it as
\begin{equation}
\begin{pmatrix}
\bH_0 & \tr{\bh} \\
\bh & \bH_1 \\
\end{pmatrix}
\begin{pmatrix}
\bc_0\\
\bc_1 \\
\end{pmatrix}
= \omega
\begin{pmatrix}
\bc_0 \\
\bc_1 \\
\end{pmatrix}
\end{equation}
This system of equation has exactly the same number of solutions.
%%%%%%%%%%%%%%%%%%
%%% CONCLUSION %%%
%%%%%%%%%%%%%%%%%%
\noindent {\textbf{Conclusion.}}
Here goes the conclusion.
%%%%%%%%%%%%%%%%%%%%%%%%
%%% ACKNOWLEDGEMENTS %%%
%%%%%%%%%%%%%%%%%%%%%%%%
DJ acknowledges the \textit{R\'egion des Pays de la Loire} for financial support.
%%%%%%%%%%%%%%%%%%%%
%%% BIBLIOGRAPHY %%%
%%%%%%%%%%%%%%%%%%%%
\bibliography{xbbib}
\end{document}
Reference in New Issue View Git Blame Copy Permalink