REPLACE

@@ -834,4 +834,3 @@ qp_name potential_sr_c_alpha_ao_pbe --rename=potential_c_alpha_ao_sr_pbe
 qp_name potential_sr_c_beta_ao_pbe --rename=potential_c_beta_ao_sr_pbe
 qp_name potential_sr_xc_alpha_ao_pbe --rename=potential_xc_alpha_ao_sr_pbe
 qp_name potential_sr_xc_beta_ao_pbe --rename=potential_xc_beta_ao_sr_pbe
-qp_name disk_access_nuclear_repulsion --rename=io_nuclear_repulsion

docs/source/research.bib

@@ -1,14 +1,4 @@
 %%% ARXIV TO BE UPDATED %%%
-@article{Giner2019Jul,
-        author = {Giner, Emmanuel and Scemama, Anthony and Toulouse, Julien and Loos, Pierre-Fran{\ifmmode\mbox{\c{c}}\else\c{c}\fi}ois},
-        title = {{Chemically Accurate Excitation Energies With Small Basis Sets}},
-        journal = {arXiv},
-        year = {2019},
-        month = {Jul},
-        eprint = {1907.01245},
-        url = {https://arxiv.org/abs/1907.01245}
-}
-
 @article{Dash2019May,
         author = {Dash, Monika and Feldt, Jonas and Moroni, Saverio and Scemama, Anthony and Filippi, Claudia},
         title = {{Excited states with selected CI-QMC: chemically accurate excitation energies and geometries}},

src/ao_one_e_ints/README.rst

@@ -6,8 +6,9 @@ All the one-electron integrals in the |AO| basis are here.
 
 The most important providers for usual quantum-chemistry calculation are:
 
-* `ao_kinetic_integrals` which are the kinetic operator integrals on the |AO| basis 
+* `ao_kinetic_integral` which are the kinetic operator integrals on the |AO| basis (see :file:`kin_ao_ints.irp.f`)
-* `ao_integrals_n_e` which are the nuclear-elctron operator integrals on the |AO| basis
+* `ao_nucl_elec_integral` which are the nuclear-elctron operator integrals on the |AO| basis (see :file:`pot_ao_ints.irp.f`)
-* `ao_one_e_integrals` which are the the h_core operator integrals on the |AO| basis
+* `ao_one_e_integrals` which are the the h_core operator integrals on the |AO| basis (see :file:`ao_mono_ints.irp.f`)
 
 
+Note that you can find other interesting integrals related to the position operator in :file:`spread_dipole_ao.irp.f`.

src/cipsi/run_pt2_slave.irp.f

@@ -148,7 +148,7 @@ subroutine run_pt2_slave_small(thread,iproc,energy)
   integer, external :: disconnect_from_taskserver
   do i=1,300
     if (disconnect_from_taskserver(zmq_to_qp_run_socket,worker_id) /= -2) exit
-    call usleep(500)
+    call sleep(1)
     print *,  'Retry disconnect...'
   end do
 

src/cipsi/run_selection_slave.irp.f

@@ -74,7 +74,7 @@ subroutine run_selection_slave(thread,iproc,energy)
     if(done .or. ctask == size(task_id)) then
       do i=1, ctask
          if (task_done_to_taskserver(zmq_to_qp_run_socket,worker_id,task_id(i)) == -1) then
-           call usleep(100)
+           call sleep(1)
           if (task_done_to_taskserver(zmq_to_qp_run_socket,worker_id,task_id(i)) == -1) then
             ctask = 0
             done = .true.
@@ -85,7 +85,6 @@ subroutine run_selection_slave(thread,iproc,energy)
       if(ctask > 0) then
         call sort_selection_buffer(buf)
 !        call merge_selection_buffers(buf,buf2)
-print *, task_id(1), pt2(1), buf%cur, ctask
         call push_selection_results(zmq_socket_push, pt2, variance, norm, buf, task_id(1), ctask)
 !        buf%mini = buf2%mini
         pt2(:) = 0d0
@@ -133,6 +132,7 @@ subroutine push_selection_results(zmq_socket_push, pt2, variance, norm, b, task_
     print *,  'f77_zmq_send( zmq_socket_push, b%cur, 4, ZMQ_SNDMORE)'
   endif
 
+  if (b%cur > 0) then
 
       rc = f77_zmq_send( zmq_socket_push, pt2, 8*N_states, ZMQ_SNDMORE)
       if(rc /= 8*N_states) then
@@ -149,8 +149,6 @@ subroutine push_selection_results(zmq_socket_push, pt2, variance, norm, b, task_
         print *,  'f77_zmq_send( zmq_socket_push, norm, 8*N_states, ZMQ_SNDMORE)'
       endif
 
-  if (b%cur > 0) then
-
       rc = f77_zmq_send( zmq_socket_push, b%val(1), 8*b%cur, ZMQ_SNDMORE)
       if(rc /= 8*b%cur) then
         print *,  'f77_zmq_send( zmq_socket_push, b%val(1), 8*b%cur, ZMQ_SNDMORE)'
@@ -205,10 +203,7 @@ subroutine pull_selection_results(zmq_socket_pull, pt2, variance, norm, val, det
     print *,  'f77_zmq_recv( zmq_socket_pull, N, 4, 0)'
   endif
 
-  pt2(:) = 0.d0
+  if (N>0) then
-  variance(:) = 0.d0
-  norm(:) = 0.d0
-
       rc = f77_zmq_recv( zmq_socket_pull, pt2, N_states*8, 0)
       if(rc /= 8*N_states) then
         print *,  'f77_zmq_recv( zmq_socket_pull, pt2, N_states*8, 0)'
@@ -224,7 +219,6 @@ subroutine pull_selection_results(zmq_socket_pull, pt2, variance, norm, val, det
         print *,  'f77_zmq_recv( zmq_socket_pull, norm, N_states*8, 0)'
       endif
 
-  if (N>0) then
       rc = f77_zmq_recv( zmq_socket_pull, val(1), 8*N, 0)
       if(rc /= 8*N) then
         print *,  'f77_zmq_recv( zmq_socket_pull, val(1), 8*N, 0)'
@@ -234,6 +228,10 @@ subroutine pull_selection_results(zmq_socket_pull, pt2, variance, norm, val, det
       if(rc /= bit_kind*N_int*2*N) then
         print *,  'f77_zmq_recv( zmq_socket_pull, det(1,1,1), bit_kind*N_int*2*N, 0)'
       endif
+  else
+      pt2(:) = 0.d0
+      variance(:) = 0.d0
+      norm(:) = 0.d0
   endif
 
   rc = f77_zmq_recv( zmq_socket_pull, ntask, 4, 0)

src/cipsi/slave_cipsi.irp.f

@@ -63,7 +63,7 @@ subroutine run_slave_main
     if (mpi_master) then
       call wait_for_states(states,zmq_state,size(states))
       if (zmq_state(1:64) == old_state(1:64)) then
-        call usleep(200)
+        call sleep(1)
         cycle
       else
         old_state(1:64) = zmq_state(1:64)

src/ezfio_files/ezfio.irp.f

@@ -39,8 +39,6 @@ BEGIN_PROVIDER [ character*(128), ezfio_filename ]
   write(command,*) 'echo 15 > /proc//'//trim(adjustl(pidc))//'/oom_adj'
   call system(command)
 
-  PROVIDE file_lock
-
 END_PROVIDER
 
 BEGIN_PROVIDER [ character*(128), ezfio_work_dir ]

src/fci/pt2.irp.f

@@ -43,13 +43,8 @@ subroutine run
   E_CI_before(:) = psi_energy(:) + nuclear_repulsion
   relative_error=PT2_relative_error
 
-  if (do_pt2) then
   call ZMQ_pt2(psi_energy_with_nucl_rep,pt2,relative_error,error, variance, &
      norm,0) ! Stochastic PT2
-  else
-    call ZMQ_selection(0, pt2, variance, norm)
-  endif
-
   do k=1,N_states
     rpt2(k) = pt2(k)/(1.d0 + norm(k))
   enddo

src/nuclei/EZFIO.cfg

@@ -21,7 +21,7 @@ type: double precision
 size: (nuclei.nucl_num,3)
 interface: ezfio
 
-[io_nuclear_repulsion]
+[disk_access_nuclear_repulsion]
 doc: Read/Write Nuclear Repulsion from/to disk [ Write | Read | None ]
 type: Disk_access
 interface: ezfio,provider,ocaml

src/nuclei/nuclei.irp.f

@@ -143,7 +143,7 @@ BEGIN_PROVIDER [ double precision, nuclear_repulsion ]
    END_DOC
 
    PROVIDE mpi_master nucl_coord nucl_charge nucl_num
-   if (io_nuclear_repulsion == 'Read') then
+   if (disk_access_nuclear_repulsion.EQ.'Read') then
      logical                        :: has
 
      if (mpi_master) then
@@ -194,7 +194,7 @@ BEGIN_PROVIDER [ double precision, nuclear_repulsion ]
    call write_time(6)
    call write_double(6,nuclear_repulsion,'Nuclear repulsion energy')
 
-   if (io_nuclear_repulsion == 'Write') then
+   if (disk_access_nuclear_repulsion.EQ.'Write') then
      if (mpi_master) then
        call ezfio_set_nuclei_nuclear_repulsion(nuclear_repulsion)
      endif

src/utils/c_functions.f90

@@ -1,19 +0,0 @@
-module c_functions
-  use iso_c_binding
-
-  interface
-    subroutine usleep_c(us) bind (C,name="usleep")
-      use iso_c_binding
-      integer(c_int), value :: us
-    end subroutine usleep_c
-  end interface
-
-end module
-
-subroutine usleep(us)
-  use c_functions
-  use iso_c_binding
-  implicit none
-  integer, intent(in) :: us
-  call usleep_c(int(us,c_int))
-end

src/utils/memory.irp.f

@@ -15,7 +15,6 @@ BEGIN_PROVIDER [ integer, qp_max_mem ]
 END_PROVIDER
 
 subroutine resident_memory(value)
-  use c_functions
   implicit none
   BEGIN_DOC
 ! Returns the current used memory in gigabytes used by the current process.
@@ -26,8 +25,6 @@ subroutine resident_memory(value)
   double precision, intent(out) :: value
 
   call omp_set_lock(file_lock)
-  call usleep(10)
-
   value = 0.d0
   iunit = getUnitAndOpen('/proc/self/status','r')
   do

src/zmq/utils.irp.f

@@ -275,6 +275,7 @@ IRP_ENDIF
     rc = f77_zmq_bind(new_zmq_pull_socket, zmq_socket_pull_tcp_address)
     if (rc /= 0) then
       icount = icount-1
+!      call sleep(3)
       zmq_socket_pull_tcp_address    = 'tcp://*:'//zmq_port(2+icount*100)//' '
       zmq_socket_push_tcp_address    = trim(qp_run_address)//':'//zmq_port(2+icount*100)//' '
     else
@@ -751,8 +752,7 @@ integer function add_task_to_taskserver(zmq_to_qp_run_socket,task)
 
   add_task_to_taskserver = 0
 
-  sze = len(trim(task)) + len(trim(zmq_state))+11
+  allocate(character(len=len(task)+10+len(zmq_state)) :: message)
-  allocate(character(len=sze) :: message)
   message='add_task '//trim(zmq_state)//' '//trim(task)
   sze = len(message)
   rc = f77_zmq_send(zmq_to_qp_run_socket, message, sze, 0)
@@ -768,7 +768,6 @@ integer function add_task_to_taskserver(zmq_to_qp_run_socket,task)
     add_task_to_taskserver = -1
     return
   endif
-  deallocate(message)
 
 end